WeLcome Home
Design
Blow Mold
Die Casting
WorkShop
Punching Tool
HOLIDAY
TS
TheDailyP
Ejector pins,Guide Bush and Sleeves
Ejector pins or sleeves,guide bush are used for demolding injection moldings.Various configurations of ejectors pins are standartized in accordance with DIN 1530.They are basically available in two grades ;tool steel,grade 1.2516,as throught hardened pins with a hardness of approximately 62 HRC,and hot work steel,grade 12343,with core strength of approximately 45HRC and a nitrided surface of about 930 HV 0,3.
Back Home | Holiday
No comments:
Post a Comment
Newer Post
Older Post
Home
Subscribe to:
Post Comments (Atom)
Ejector pins or sleeves,guide bush are used for demolding injection moldings.Various configurations of ejectors pins are standartized in accordance with DIN 1530.They are basically available in two grades ;tool steel,grade 1.2516,as throught hardened pins with a hardness of approximately 62 HRC,and hot work steel,grade 12343,with core strength of approximately 45HRC and a nitrided surface of about 930 HV 0,3.
No comments:
Post a Comment